CMR vs SMR Hard Drives, Explained

Two hard drives can have the same size, speed and price and still behave very differently under heavy use. The difference is often the recording method: CMR or SMR. It rarely matters for a backup drive you fill once and read occasionally. It can matter a lot in a NAS or RAID array. This guide explains both in plain terms and lists what the makers themselves say about their drive lines.

How a hard drive writes data

A hard drive writes data in thin circular tracks on spinning platters. The two methods differ in how those tracks sit next to each other.

CMR (conventional magnetic recording), also called PMR, writes each track separately with a small gap from its neighbours. The drive can rewrite any track without touching the ones around it. This is how hard drives have worked for many years.

SMR (shingled magnetic recording) overlaps each new track partly over the previous one, like roof tiles or shingles. Packing tracks closer together fits more data on each platter, which helps makers offer more capacity for less money. The catch is that rewriting a track disturbs the tracks it overlaps, so the drive has to rewrite a whole group of them. Drives that handle this internally are called drive-managed SMR (DMSMR). They usually do the extra work in the background, using a fast cache area.

Why it matters

For everyday use, most people never notice. Reading data is the same speed either way, and writing in short bursts goes into the drive's cache.

The difference shows up with long, continuous writes that fill the cache faster than the drive can tidy up behind it. The best-known case is rebuilding a RAID or NAS array after a drive fails: the replacement drive has to be written from start to finish while the array is in use. With an SMR drive, that sustained write load can slow down sharply. In 2020 this became public when some buyers found that NAS drives they had bought were SMR, and makers responded by publishing which models use which method.

That history is why NAS and RAID users generally look for CMR drives, and why it is worth checking before you buy.

What the makers say

These points come from the makers' own published statements and lists. They describe product lines and capacities; always confirm the exact model number on the maker's spec sheet, because a line can change over time.

Western Digital

In its statement on WD Red NAS drives, Western Digital says the WD Red line at 2 TB, 3 TB, 4 TB and 6 TB uses drive-managed SMR. It says WD Red Plus is the name for its CMR NAS drives in the WD Red family (1 TB to 14 TB), and that WD Red Pro is also CMR. If you want a WD NAS drive in those capacities and you want CMR, look for "Red Plus" or "Red Pro" in the name, not just "Red".

Seagate

Seagate publishes a list of its drives by recording method. It lists IronWolf and IronWolf Pro NAS drives as CMR at every capacity shown. It lists the 3.5-inch BarraCuda desktop drive as SMR at 4 TB and 8 TB, and the 2.5-inch BarraCuda laptop drive as SMR at 2 TB and 4 TB. Larger 3.5-inch BarraCuda capacities on the list are CMR.

Toshiba

Toshiba's product page for the N300 NAS hard drive says it uses CMR.

What this means for drives in our list

Every drive on our NAS hard drives page belongs to one of the NAS lines above that the makers describe as CMR: WD Red Plus, WD Red Pro, Seagate IronWolf, Seagate IronWolf Pro or Toshiba N300. The cheapest per terabyte right now is the Western Digital 10TB WD Red Plus NAS Internal Hard Drive HDD at ₹4,706.

Seagate BarraCuda drives also appear in our tables from time to time. Going by Seagate's own list, the 4 TB 3.5-inch BarraCuda and the 4 TB 2.5-inch BarraCuda are SMR. They are fine for a desktop data drive, a game library or backups, but they are not what you want in a RAID array. Seagate's list does not include a 2 TB 3.5-inch BarraCuda, so check the spec sheet for that model.

Our product data does not have a CMR or SMR field, so the main tables do not show it. When it matters, use the model number from the product title to check the maker's list.

Do you need CMR?

  • Single external or desktop drive for backups, photos, videos or games: SMR is usually fine, and you may save money.
  • NAS with two or more drives, RAID or ZFS: choose CMR. Buy a NAS line the maker describes as CMR.
  • Drive that will be written to constantly (security camera recording, for example): look at drives the maker rates for that workload, and check the recording method on the spec sheet.

How to check a specific drive

  1. Copy the model number from the product title or listing (for example, a code that starts with WD, ST or HDW).
  2. Look it up on the maker's own site: WD's statement and SKU list, or Seagate's CMR and SMR list.
  3. If you cannot find it, the maker's support team can tell you. If a seller cannot say, assume nothing.

See internal hard drives and NAS hard drives for current prices, sorted by cost per terabyte.

Sources

Cheapest per TB right now

Prices as of 21 Nov 2026 12:16 IST (21 Nov 2026 06:46 UTC) – 21 Nov 2026 13:29 IST (21 Nov 2026 07:59 UTC).